SHIMPO DT205NC tachometers incorporate laser technology yet retain our hallmark rugged construction and reliable quality components; both offer incredible value and versatility as they perform non-contact and contact applications via the included contact adapter. We're confident you'll agree that these fine units are the most advanced handheld tachometers on the market!
Applications:
Input/output shaft speed, belt, fan speed, total length and flash rate; from propeller speed to wire or yarn/filament speed, pulp and paper mills to blood centrifuges, Shimpo tachometers are the tachometers most requested by professionals. Some of their most common uses:
1.Measuring shaft speed
2.Measuring conveyor belt speed
3.Calibration (comparing speeds to verify that panel mounts are reading correctly)
4.Measure linear speed
5.Measure distance (length)
6.All handheld tachometers are shipped with NIST certificates with data points
Specifications |
Model |
DT-205NC |
Measuring Range |
0.10 - 25000 RPM with floating decimal |
Accuracy |
กำ 0.06 RPM : 0.10 - 999.9 RPM; กำ 0.06 RPM :1,000.0 - 9,999.9 RPM
กำ 0.006 % of reading กำ 1 digit ( or 2 RPM max. ) : 10,000 - 25,000 RPM |
Display |
5 digit 0.47" (12 mm) high LCD |
Measuring Units |
Revolutions:RPH,RPM Feet: FPH,FPM Miles:MPH
Yards:YPH,YPM Inches:IPM Meters:mPH, mPM
Length: cm,, m, inches, feet, yards Total Revolution: REV |
Memory |
13 readings are stored in memory and retained for 5 minutes (last, max,min, and 10 extra measurement) |
Display Uupdate Time |
1 second (typical) |
Detection |
Optical coupler, 60 pulse/rev. |
System Control |
Single-chip C-MOS Micorprocessor |
Over range indicator |
Flashing numerals |
Voltage Requirement |
2AA 1.5 V batteries |
|
Flashing "LO BAT" display |
Auto Power Shut-Off |
Yes |
|