Initial input of the tolerance limit (upper/lower) enables the device to judge the measured result as GO/NG
Measured results will be automactically memorized up to 256 measurements.
Various options are offered for outputs; CENTRONICS output, RS232C output, analog output, digimatic output and switch output.
4.STATISTICAL PROCESSING & PRINT ING OF INSPECTION REPORT
The HF series can calculate figures of the standard deviation and the process capability index and those figures can be printed out on your printer in form of the inspection report when the CENTRONICS interface (optional) is adopted.
Initial setting on the device is possible for measurement of peak force, insertion/withdraw force, insertion compression peak force, withdraw extension peak force and holding force at contact point. Aslo, the device is applicable for setting of various printing modes, input of local NEWTON value and other various modes settings.
6.HIGH ACCURACY, HIGH RESOLUTION
The Hf series have achieved extremely high accuracy; such as !O0.2%FS of accuracy and !O0.1%FS of repeatable accuracy. And also, the HF series perform extremely high resolution. For example, the 10kgf capable device can indicate minimum 1 gf. it means 1/10000 resolution.
7.AUTOMATIC POWER OFF
The HF series have automatic power-off functon to save battery and to keep the device safe. Power off time can be changed at the range of 01-99 min.
8.LOCAL NEWTON VALUE INPUT
The terrestrial gravitation varies with where measurement is performed. Measurement error by gravity difference will be eliminated inputting the local Newton value according to the measurement place.
9.PEAK HOLD FUNCTION
Single operation can perform measurement of both compression peak data at insertion and extension peak data at withdraw.
10.RS232C SETTING FUNCTION
It is possible to set data bit length, baud rate, stop bit length and parity bit to connect with your computer.
Buttons are well arranged for easy operation to perform multipurpose measurement.